Your car will require repainting at some point due to unexpected damages. Professionals will charge you a lot of money because they ise clear topcoat finish hence the idea of doing it yourself. If you have a clue or experience on How to Paint Metal Materials, the painting is much easier. Check out the following tips and steps so as to achieve a quality painting.
Some of the important supplies needed should be assembled in time so as to avoid a last-minute rush and they include; sandpaper, masking tape, and paper spray gun, primer, a face mask, air compressor, and glasses for eye protection. The paint you need is determined by the surface area that is to be painted. Check the color code as indicated in the manufacturer’s manual so as to avoid a color mismatch. In addition, find a clean place that is protected from weather conditions like sun and rain.
- Getting started
Do a thorough sanding so as to achieve a smooth and even surface. Circular motions are recommended if you want a smooth surface.
Take a clothing a wipe the part with a thinner so as to eradicate dust before painting begins.
Mask the parts that are not supposed to be painted
- Prime your vehicle
Have your mask on so as to prevent inhaling paint as it can affect your lungs. Your eyes should be protected by using glasses.
Even if you do not know How to Paint Metal Materials there is a way out. Take a piece of metal and practice this technique. A continuous motion should be maintained for an even surface.
Follow the directions on the paint can so as to get a good mixture of primer and thinner.
Start priming as you spray from the vehicle’s roof downwards. Two or three coats will cover the targeted surface evenly.
A complete primer drying should be allowed before adding another coat.
Resand any powdered part after your priming so as to maintain an even surface. Clean clothing should be used with a little thinner so as to avoid stripping your primer.
- Paint your vehicle
Use thinner and ensure the topcoat is thinned. The correct ratios are outlined on the can.
Similar techniques like those of priming are used to apply the topcoat.
Each coat should be allowed to dry completely before adding another.
Your supplies indicate that you should do three of four coats so as to attain an even surface.
If you discover a residue wipe it before you do the last coat.
- Lacquer your vehicle
The steps in the painting are the same when applying lacquer. One or two coats are recommended.
The masking should be carefully removed while the last coat of lacquer is wet.
Make sure you allow your vehicle to dry and check for any possible blemish. If you see any, sand it nicely and spray again.
Use a buffer to buff the surface. Do it carefully so as not to get the paint burned.
The discussed steps are easy to follow therefore embrace them to paint your car. It avoids unnecessary expenses when a professional is engaged. From one step to the other, you will finally achieve a quality painting.